Product Name：Dual Thermostat NT 71-F
Product Model：NT 71-F
When connecting with wires, wire end ferrules must be used.
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
• NO and NC in one casing
• Separate adjustable temperatures
• High switching capacity
• Terminals easily accessible
• Clip fixing
Two thermostats in one casing:
Thermostat (contact breaker, normally closed) for regulating heaters. The contact opens when temperature is rising.
Thermostat (contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded. The contact closes when temperature is rising.
Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.
FPI 018 | 120x120mm
NTL 10A-F/NTL 10B-F
FPI 018 | 152x152mm
DMO 1140-F/DMS 1141-F
FPI 018 | 204x204mm
FPI 018 | 255x255mm